SealLock 58 – Pressure Sensitive Jar Seals

Seal Glass & Plastic Jars Without Heat Induction Equipment

SealLock 58 pressure-sensitive foam liners are designed to create a simple jar seal using torque-activated adhesive—with no heat induction equipment or special sealing tools required.

These 58 mm (2.28") seals are intended for compatible jars with approximately 1 3/4" (44.5 mm) inner neck diameter and 2 1/8" (54 mm) outer neck diameter.

• ✓ 58 mm pressure-sensitive foam liners

• ✓ No heat induction equipment required

• ✓ No special sealing tools required

• ✓ Compatible with glass and plastic jars

• ✓ Can be used with lined or unlined caps

• ✓ Best suited for powders and dry products

Simple Application

Clean the top of the jar thoroughly to remove liquid or solid residue. Center the liner over the jar opening with the white side facing down and the black-lettered side facing up, then screw the cap on tightly.

For proper adhesion, the cap should remain in place for at least 24 hours before removal.

Important Use Guidelines

• Match the seal size to the jar opening before use.

• Avoid overfilling the container.

• Designed primarily for powder and dry-product applications.

• Not suitable for products containing oil.

• Once removed, the seal cannot be reapplied.

  
  

A Straightforward Way to Add a Pressure-Sensitive Seal

For compatible glass or plastic jars, SealLock 58 provides a practical sealing option that works through cap pressure instead of heat-induction equipment.

CHOOSE SEALLOCK 58 FOR YOUR COMPATIBLE JARS